• Approximately 0–1 years
• Suitable 4-35 lbs and up to 32″ in height (whichever comes first)
• Car Seat dimensions: 17″W x 25.8″L x 23″H
• Car Seat on base dimensions: 17″W x 28″L x 25″H
• Car Seat base-only dimensions: 14.5″W x 21.3″L x 10.3″H
• True weight:
  Car Seat 9.9 lbs
  Base 9 lbs

• 4th anti-rebound handle position for increased safety in rebound & rear-impact collisions
• Large, adjustable headrest for additional SIP performance
• European Routing for a more secure installation when installing without the base
• Included infant insert and low harness position for babies approximately 4-11 lbs
• Carrier weighs under 10 lbs
• Adjustable headrest with side impact protection
• No-rethread harness that adjusts with headrest
• Storage pockets for harness buckles
• One crotch buckle position
• Large, UPF 25+ hideaway canopy
• Direct attachment to VISTA and CRUZ strollers
• Convenient adapters available for the MINU and RIDGE strollers
• Carry handle with stroller release button
• Removable and washable seat fabric
• Fabric free from flame-retardant chemicals

• SMARTSecure® System installs in seconds
• Red-to-green tightness indicator
• Built-in lock-off for secure seatbelt installation
• Level indicators on both sides
• Streamlined, low-profile base with finished bottom
• Four-position adjustable foot for easy leveling

• Car seat
• Base
• Robust infant insert (suitable approximately 4-11 pounds)

For the ultimate in portability and safety, MESA V2 directly attaches to both the VISTA® and CRUZ® strollers. It is even compatible with the MINU® and RIDGE® with the addition of convenient adapters. This creates a stylish and simple solution that goes from drive to stroll (and back again).

Yes, you must remove the Mesa V2 before folding the Vista, Cruz, Ridge or Minu stroller.

Yes, the Mesa V2 carrier is FAA approved when used according to the instruction manual We suggest you travel with your Mesa V2 in flight for optimal safety. The Mesa base is not approved for aircraft use.

The Mesa V2 seat pad, infant insert, buckle pad, and shoulder pads can be machine washed on the gentle cycle. Lay flat to dry. We recommend spot cleaning the canopy and plastic parts. The harness webbing should be cleaned with warm water and dish soap.

State and federal safety standards require all car seats meet stringent flame retardancy standards (also referred to as FMVSS 302). For the Mesa V2, UPPAbaby meets this standard without applying any fire-retardant chemicals to the fabric that is in direct contact with the child. The foam that is underneath the fabric is treated to meet this requirement, however, the composition does not include harmful chemicals. Additionally, the Mesa V2 is GREENGUARD Gold Certified which tests for low chemical emissions, VOC’s.

The base is not required to achieve a safe and secure install. The lap belt routes through the guides on the carrier that are located near the carry handle, and the shoulder belt routes behind the carrier through the guide located above the carrier release from base handle. Reference the Mesa V2 manual and vehicle manual for seat belt installation guidance.